Cold-formed steel building system is a load bearing wall system that combines three highly acceptable building methods, built-up steel joist cassette, hollow-core concrete slabs or composite steel/concrete deck resting on light steel framing stud walls. The system is typically ideal for low to mid-rise construction (3 to 10 story high buildings). This story limit covers a wide range of building usage, including apartment buildings, office buildings, health care facilities, hotels, schools and dormitories. Steel stud walls offer the advantages of high stiffness-to-weight ratio, rapid field installation, and the longest design spans when compared to other floor systems and the composite steel/concrete deck provides permanent form and tension reinforecement for the floor slab. The complete system offers faster time schedules, reduced cost and better coordination with other construction groups.

12.5mm gypsum plate 12mm chipboard (OSB-3) vapor barrier sd = 100 m steel construction 150mm PUR foam thermal insulator airtight/reflective insulation 12mm chipboard (OSB-3) corrugated steel sheet
12.5mm gypsum plate 12mm chipboard (OSB-3) vapor barrier sd = 100 m steel construction 150mm PUR foam thermal insulator airtight/reflective insulation 12mm chipboard (OSB-3) silicone plaster
12.5mm gypsum plate 12mm chipboard (OSB-3) vapor barrier sd = 100 m steel construction 150mm PUR foam thermal insulator airtight/reflective insulation 10mm magnesium oxide board Mg0
top layers – roofing felt base layer – roofing felt 12mm chipboard (OSB-3) aluminum foil reflective insulation PUR foam thermal insulator 150mm steel construction 150mm foil PE (vapor barrier; sd=100m) 12mm chipboard (OSB-3) gypsum plate 12.5mm